Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$4.99
Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
$8.00
- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)
$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each
$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$11.99
- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
$11.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany
$12.99
An easy-to-install fender for blocking tire spray and protecting fork stanchions in sloppy conditions. So fast and so clean The Bontrager Enduro Front Fender keeps menacing tire spray away while also protecting your fork stanchions from trail splatter. This durable, flexible poly fender has you and your bike covered when the trail gets sloppy. Installation is quick and easy, and the reversible design offers graphic options for bonus styles, free of charge. Product details - Quick and easy attachment installs to most forks in seconds - Easy installation with four attachment locations (attachment zip ties not included) - Multiple mounting eyelets for easy adjustment and compatibility for most forks and tire widths - Flexible 1mm poly material is durable and can be easily cleaned - Reversible design offers two graphic options - Recyclable polypropylene material
$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$13.00 - $15.00
Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$13.99
Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
$14.99
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame
$15.00 - $20.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
$15.95
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.
$15.99
- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$16.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
$17.99 - $22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$18.99
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - Fat Face: you guessed it, extra wide for Fatbike applications
$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$21.00
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
$21.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
$22.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
$23.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
$24.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$25.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$26.99
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.
$29.99
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
$32.99
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.
$32.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible
$32.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible
$32.99
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
$32.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
$32.99
The X-Guard is a universal downtube fender for any wheel size. It is attached using two straps on the lower bar (downtube), making it compatible with fat bikes and bicycles with oversized tires for all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-Guard suitable for any frame shape and all common battery models.
$33.99
The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount
$34.99
Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires
$37.95
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$37.99
Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender. - Measurements: 490mm - Weight: 112 grams - Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes. - Made in Germany
$39.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)
$41.99 - $47.99
Accessorize your ride. Keep yourself dry. Genuine Replacement Parts No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Original equipment replacement fenders for Trek Powerfly - Mounting hardware sold separately - Front fenders are designed for SR Suntour suspension fork mounts, other forks may be incompatible - Front fenders are shared with Powerfly FS 2021 equipped models - Front fenders include struts - Rear fenders do not include struts as they require Powerfly HT specific rear rack for assembly Fender, rack and kickstand compatibility - Use the compatibility guide to match the right parts with your bike and simplify installation of your new accessories.
$44.99
S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm
$49.99
Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.
$57.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$59.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ESC safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ESC safety system - Bottom bracket cutouts - Made in Germany - Wheel size: 20" - Tire width in inches: 1.2"-1.8" - Tire width in mm: 30-54mm - Front mudguard length: 500mm - Rear mudguard length: 800mm
$59.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany
Page 1 of 2 Next page