Chainrings

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks

absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB

Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)

Dimension Chainrings. - No ramps, pins, or shift aids

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - Easton Cinch™ cranksets including (EC90SL) - 3mm offset provides optimal chainline for CX and Road - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 47mm DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 28t/54g | 30t/58g | 32t/63g | 34t/69g | 36t/72g | 38t/81g | 40t/89g | 42t/94g - Material: 7075-T6 aluminum - Made in the USA

The Wolf Tooth 76 BCD chainrings work great on any 76 BCD spider or crankset. These will replace the more expensive rings used on SRAM XX1 spiders or other manufacturer's spiders such as Cannondale. Also a great fit on the Specialized Stout crankset. - Fits any 76 BCD crankset or spider - Drop-Stop® technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Note - Use standard M8 chainring bolts, not the M8.5 bolts included with XX1 spiders. Our patented Drop-Stop tooth design provides superior chain retention, wear life and mud-shedding capability. Compatibility: - These rings fit any SRAM 76 BCD spider or Specialized Stout crankset. Here are instructions on how to measure your BCD. - Threaded for standard M8 chainring bolts. For the XX1 spider, we recommend the 6mm bolts (or any short M8 chainring bolt). For the Stout crankset we recommend the 10mm bolts or the bolts that come with the crankset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 30t/45g | 32/51g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. - Crank arm clocking arrow will be rotated 180 degrees from normal on cranksets that have 4 bolts visible and 1 hidden bolt behind the crank arm like for SRAM. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck. - Recommend the use of a clutch style rear derailleur for the best chain security. Tech Specs: - Weight: 36t/58g | 38t/66g | 40t/74g | 42t/81g - Material: 7075-T6 aluminum - Made in the USA

Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth's patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 38t/72g | 42t/92g | 46t/102g - Material: 7075-T6 aluminum - Chainline: 50mm (same as Shimano GRX chainrings) - Made in the USA

These chainrings are for Easton or Race Face Cinch cranks. Updated tooth profile works with SRAM Flattop chain. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility: - Easton Cinch™ cranksets including EC90SL - Works with SRAM Flattop chain - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 38t/80g | 40t/91g | 42t/96g | 44t/113g | 46t/129g | 48t/139g | 50t/149g - Material: 7075-T6 aluminum - Made in the USA

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. The direct mount chainrings for SRAM cranksets with the 3 bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9, 10, 11, and 12 speed chains except Shimano 12spd chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC Not compatible with 12s Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38t/90g | 40t/96g | 42t/104g - Material: 7075-T6 aluminum - Made in the USA

"The perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. Also, they look great when paired with our 104 BCD bash ring on a 104/64 BCD crankset - Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position) - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility - Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position) - The Universal Model fits both 104/64 BCD cranksets and the Shimano 11 speed XT M8000 cranks and SLX M7000 cranks. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline (approximate as BB centering and cranksets vary) - Chainline is 46mm on a triple and 48mm on a double crank - Chainline on a Standard M8000 or M7000 crankset is 48mm and 50mm on a boost version - You will use the stock bolts to mount to this chainring - Use Drop-Stop A for all 9, 10, 11 spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Wihtout these precautions, you may experience chaindrops and/or chainsuck"

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

These nickel-plated chainrings were designed to look great on the Cane Creek eeWing titanium cranksets. They also work great on SRAM direct-mount cranksets. The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology. - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system. - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention. - Prevents premature ring and chain wear that can come from non-optimized profiles. More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - Cane Creek eeWing cranksets - SRAM direct mount cranksets with 3-bolt interface - Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy Tech Specs: - Weight: 32t/74g - Material: Nickel-plated 7075-T6 aluminum - Made in the USA

- New 3D composite chain ring teeth composition is optimized for chainwheel load out

The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38T/90g | 40T/106g | 42T/111g - Material: 7075-T6 aluminum - Made in the USA

These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

64BCD chainring for MTB cranksets

Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

absoluteBLACK Premium Oval 110 BCD Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for 4-bolt or 5-bolt FSA cranks such as Gossamer, SL-K, and K-Force with asymmetric bolt spacing. 4- and 5-bolt cranks are identical with the exception of the one hidden bolt behind the crank arm in 5-bolt design, which is not needed. Optimized with smooth shifting in mind, premium chainrings have a unique shift ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - For Gossamer and SL-K cranks, use the original FSA hardware for installation - For K-Force cranks, you will need to purchase absoluteBLACK bolt covers for installation - 3.5% ovality is ideal for road climbing

This direct mount chainring coincides perfectly with the Afterburner Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Material: Steel - Precision CNC-machined AL7075/T6 - Long tooth profile enhances chain retention - Thick Thin tooth design for maximum chain engagement - SH12: Compatible with Shimano 12s chain

- Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Crankset Compatibility: Gossamer ABS 2019

Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

FSA's MTB Pro chainrings deliver flawless shifting for mountain drivetrains. - Precision CNC machined AL7075/T6 alloy - Shifting ramps and stainless pins for improved performance - D-10 chainrings are double 10 speed Sram/Shimano compatible, but are only guaranteed perfect fitment on FSA MTB cranksets

absoluteBLACK Premium Sub-Compact 110 BCD Oval Chainrings are designed to improve your climbing and cadence. They are compatible with all Shimano 110 BCD 4-bolt cranks. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Sub-Compact chainrings only work in predefined size combinations: 46/30 or 48/32 - Mounting bolts are included with the small ring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Use Shimano Dura-Ace 11-speed chain or SRAM Eagle 12-speed chain for proper clearance of mounting tabs - Not compatible with SRAM Yaw front derailleurs - 10, 11, and 12-speed compatible - 9% ovality is ideal for climbing

absoluteBLACK Silver Series Oval 110 BCD Chainrings feature many of the same benefits as absoluteBLACK's Premium line, but with less material machined out on the outer side, allowing for easier maintenance and cleaning. They are designed for Shimano 4-bolt cranks, such as Dura-Ace 9000, Ultegra 6800, 105 5800, and others. Optimized with smooth shifting in mind, these chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Designed for your winter/training bike where weight is not an issue but ease of cleaning is - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

The new FLT 12 SPD chainring has an updated tooth profile optimized for SRAM Flattop 12 SPD chains. Easton direct mount rings use a new narrow/wide design specifically tailored to road/cx/gravel applications. The individual tooth profile has moved from the traditional symmetrical shape to more directional specific design with the intention to create a positive chain roller engagement to help with chain retention, critical to prevent chain slip and bounce over rough terrain. Compatible, but not optimized for, 11-speed chains. Ring only. Crankarms and spindles sold separately. - EA90 SL Alloy - Optimized for 12-Speed Flattop Chains - Cinch System Compatible - Variable Tooth Width - Optimized Retention via Directional Tooth Design - Weight Complete: 442g 172.5mm 40t w/o BB - Chainline: 47mm

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - Compatible with 4-bolt, 104/64 pattern crank arms

Deore M6000 series 10-speed chainrings provide smooth and reliable shifting, ideal for off-road riding conditions. - Shimano HG-X technology - Compatible with 4-arm crank design

Deore M6000 series 10-speed chainrings provide smooth and reliable shifting, ideal for off-road riding conditions. - Shimano HG-X technology - Compatible with 4-arm crank design

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for Shimano Dura-Ace 9100, Ultegra 8000, & 105 R7000 4-bolt cranks only. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - 10, 11, and 12-speed compatible - Ramps are designed specifically for a 50/34 combination - If only switching the inner chainring to oval, use all original crank bolts - 6.5% ovality is ideal for road climbing

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

absoluteBLACK Premium Sub-Compact 110 BCD Oval Chainrings are designed to improve your climbing and cadence. They are compatible with the majority of 110 BCD 5-bolt cranks. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Sub-Compact chainrings only work in the 48/32 size combination - Mounting bolts are included with the 32T ring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Not compatible with SRAM Yaw front derailleurs - 10, 11, and 12-speed compatible - 8% ovality is ideal for climbing

Upgrade your e-bike drivetrain with our Bosch e*spec Direct Mount Chainrings. Our M3 narrow-wide tooth profile reduces weight without compromising on chain retention. While the steel version is a direct OEM replacement, the premium aluminum versions provide cleaner aesthetics, lighter weight, and long-lasting performance perfect for when you're ready to upgrade from your original ring. Conquer your e-bike trails at a great price—power up your drivetrain now! - Direct Mount chainring for Bosch and Shimano E-Bike fitment - Updated M3 narrow-wide tooth profile eliminates chain noise and decreases overall system wear while retaining chain - 11/12 speed. Compatible with both Shimano and SRAM 12 speed drivetrains

Gates Carbon Drive CDX Front Sprockets for Bosch GEN2 are crafted from stainless steel and are the best choice for high-mileage touring or rugged off-roading. - Bosch GEN2 fitment - Stainless steel construction - 11mm pitch - Includes shim kit

UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.

The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

Shimano 105 5703 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on triple cranksets.

Tall teeth with alternating tooth profiles hold the chain amazingly well and still provide space for mud to clear. - Full CNC Aluminum rings - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 10, 11 - Chainring BCD: 110 SRAM Asymmetric

It’s undeniable that some riders’ pedaling styles benefit from oval chainrings, so SRAM has engineered the new X-SYNC 2 Oval chainrings to give them the advantage they want. They are the only oval option available with SRAM's genuine X-SYNC 2 teeth profile, so they are the only oval chainrings on the market that are 100-percent optimized for Eagle. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Offset: -4 - Chainline/Hub Compatibility: 190/197 Hubs

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chains - Material: Aluminum

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs

Shimano SLX M7000 10-Speed chainrings get worn out drivetrains back in like-new condition.

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum

Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading. - Constructed of 6061 aluminum - 11mm pitch - CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system

Rugged durability comes naturally to the XX Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - 3mm offset - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains

Designed specifically for use e-mtb drive systems, SRAM’s XX T-Type direct-mount rings offer light weight with optimal retention performance needed for e-mtb. - Steel and Aluminum construction

Note: This is a CAMO Chainring ONLY. A CAMO Spider is required to complete this system. The CAMO chainring system was created by the Wolf Tooth engineers for Chainline And Material Optimization on direct mount style Chainrings. The key advantages include: - Perfect chainline - for wear and shifting precision - Optimal material usage - for weight, stiffness, and wear - Price - for less expensive replacement chainrings - Swapping - Very fast chainring change out with 5 small bolts and no nuts. - Availability - Wolf Tooth is the one-stop-shop for your direct mount needs...round or oval, stainless or aluminum, and no matter the crankset. - Bling!! - spider colors and bolt colors add a little flash to your sweet ride. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability Compatibility: - This is a chainring for the Wolf Tooth CAMO spiders. It is NOT compatible with any other chainring mountings. - The CAMO spiders come with Stainless Steel Bolts. - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Chainline - varies by which spider you choose - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommended - A clutch style rear derailleur will be best for chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 28t/ 25g | 30t/ 35g | 32t/41g | 34t/48g | 36t/57g | 38t/66g - Material: 7075-T6 aluminum - Made in USA