Filter By:
Pedals

$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 475g

$31.90
- Same light alloy body found on the Sylvan Touring, but with more teeth on the cage for added grip

$31.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 15mm height/100mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 345g

$32.50
- Touring/Cross pedals with light alloy body and toe-clip compatible cage
- Don't let the retro looks fool you, this workhorse with its wide platform is great for everyday use

$32.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, and a wider, dual-concave platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
- 9/16"

$33.99
The Slash is a low-profile, loose-ball pedal with a chromoly spindle, replaceable pins, and a classic shape.
- Cast alloy body, crmo spindle
- Replaceable pins
- Loose ball
- 9/16"

$35.99
A huge leap forward in pedal technology that results in a simpler overall design. Extremely lightweight plastic bodies eliminate the need for bearings and allow for a spindle that is significantly stronger than normal. Metal pins make the pedal very grippy, and the pedal will still function normally when pins are removed from one side for grind tricks. No flimsy outboard end caps. Pedal body halves are easy and inexpensive to replace – instead of replacing the whole pedal.
- 9/16-inch, heat-treated, 4140 chromoly spindle
- Proprietary high-strength plastic composite

$36.99
Thinner profile pedal body, completely flat, without any kind of bump or raised section. Combined with a larger overall surface area, a dual concave design, and a micro-knurled surface. A larger pedal gives the foot more support, especially on tricks where your feet come off and also on hard landings, since the load is more spread out and evenly distributed. The Seeker pedal uses twin sealed bearings and a bushing for extra support.
- Strong spindle design
- Thinner profile, larger platform
- Replaceable pedal body
- 9/16"

$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 520g

$39.95
Wellgo WPD-823 Clipless Mountain Pedals.
- Includes 98A cleats, Shimano SM-51 compatible
- Dual-spring release/entry tension adjustment
- Four degrees of Rotation
- 9/16"

$39.99
- Street platforms with one-piece alloy body
- Great for use with soft-soled street shoes
- Toe clips and straps required (single strap only)

$39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"
$40.00
Secure your everyday cycling confidence and comfort in the essential urban pedal from LOOK. Geo City is a lightweight, upgradeable and affordable platform pedal but with all the style, quality and durability that’s made LOOK pedals the champion’s choice for decades, and the best out on the city streets today.
- Technology: Flat pedals
- Body: Composite
- Traction: Composite
- Spindle: Chromoly+
- Surface area: 110x107mm
- Weight (pedal): 165g
- Weight (pair): 330g

$44.99
Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn't have to mean boring!
- Tough nylon composite body with in-mold pins
- Chromoly steel, 9/16" spindles, sealed cartridge bearings, and nylon bushings
- Platform Size = 118 x 99 x 19 mm
- Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort
- Platform Size = 118 x 99 x 19 mm~Recommended for riders with shoe size 42 (US men's 9 / women's 11) or larger
Specifications:
- Pedal Body Material: Composite
- Pedal Type: Platform
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly
- Weight: 330

$49.90
- Great for safely carrying bikes on rear-mount car racks, preventing damage to car or other bikes
- Pedals fold up vertically, providing for easier bike storage
- All alloy platform, usable on both sides. Includes reflectors

$49.95 - $59.95
Power Grips Sport Pedal Kits include black Power Grips attached to a pair of quality, metal cage pedals.
- Offers increased pedal power and exceptional durability at a low price point
- Pedals feature a resin body with steel cage, ball and cone bearings, forged spindle, and a wide platform
- The pre-set adjustable bracket easily adjusts to fit different shoe sizes with a Phillips screwdriver and 8mm wrench
- 9/16"

$49.99
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip.
Confident and durable
Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance.
- Durable nylon body with a proven shape for comfort and confidence
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with either 6mm hex or standard 15mm pedal wrench
- Spindle diameter: 9/16-inch

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: 10-15 (us) // 43-49 (eu)
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 100mm x 100mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 299g per pair

$49.99
Dimension Mountain Pro Pedals.
- Forged aluminum body
- Sealed bearings
- Accepts toe clips
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 270 g

$49.99 - $59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g

$50.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
- 380 grams (pair)

$50.00
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings.
- 385 grams
- 9/16 axle

$52.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction
- 13.3mm height/105mm width
- CrMo spindle axle with a smooth running, sealed inner bushing/dual-outer sealed bearing system
- Weight: 315g

$53.90
A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability.
- 15 x 95 x 25mm (L x W x H)
- 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal
- Designed with grease ports; 'V-lube' grease syringe included with pedals
- Double concave pedal body for control and stability
- Classic parallelogram shape
- 9/16"

$54.95 - $72.95
An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions.
- High-impact nylon body built to take abuse
- Smooth-running sealed bearing and DU bushing
- Electroplated chromoly spindle
- Electroplated stainless steel replaceable pins for added grip with shoes or boots
- Nylon body doesn't suck heat out of your feet like alloy pedals do
- Height: 14mm
- Width: 105mm
- 9/16"