Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "crank brothers"

Campagnolo Record Bottom Bracket Cups
$35.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Campagnolo Super Record Ultra-Torque Bottom Bracket Cups
$35.00
Campagnolo's Super Record Ultra-Torque Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Campagnolo Ultra-Torque Bottom Bracket Adapters
$35.00
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components - Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections - Ultra-Torque OS Fit BB-cup tool is required for adapter installation
Campagnolo Power-Torque Bottom Bracket Cups
$38.00
Campagnolo's Power-Torque Bottom Bracket Cups are perfect for your Campy Power-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Campagnolo Record Bottom Bracket Cups
$40.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread.
Campagnolo Potenza 11 Crankset
$300.00
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests. -Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings -Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup -Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly -Requires use of Power-Torque bottom bracket cups -Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain -Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
Campagnolo Record Pista Crankset
$320.00
Campagnolo's Record Pista Crankset gives you amazing power transfer for the toughest sprints. If your days are spent dreaming of velodrome glory, then make sure you have the crankset that can get you there.
Campagnolo Chorus Crankset
$525.00
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
Campagnolo Record 12x2 Speed Crankset
$580.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Campagnolo H11 Crankset
$720.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Campagnolo Super Record Carbon Crankset
$870.00 - $985.00
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
Campagnolo Super Record 12x2 Speed Crankset
$1,035.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Chris King ThreadFit 24 Conversion Kit #10
$21.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 68mm Threaded BB Shell - 24mm Mountain Cranksets - Common Cranks: Shimano mountain, FSA mountain, FSA SLK Light, Gravity, Race Face mountain, Rotor, Surly - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Conversion Kit #12
$21.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 73mm Threaded BB Shell - 24mm Mountain Cranksets - Common Cranks: Shimano mountain, FSA mountain, FSA SLK Light, Gravity, Race Face mountain, Rotor, Surly - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Conversion Kit #8
$21.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 68mm Threaded BB Shell - 24mm Road Cranksets - Common Cranks: Shimano Road, FSA road, Rotor - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Conversion Kit #11
$28.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 68mm Threaded BB Shell - 24mm to 22mm Stepped Mountain Cranksets - Common Cranks: SRAM mountain, Bontrager mountain, TruVativ mountain, Zinn mountain - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Conversion Kit #13
$28.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 73mm Threaded BB Shell - 24mm to 22mm Stepped Mountain Cranksets - Common Cranks: SRAM mountain, Bontrager mountain, TruVativ mountain, Zinn mountain - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chromag Sequence DM Ring
$69.00
The Sequence chainring uses the official X-SYNC technology licensed from SRAM for unmatched chain retention. Chromag is the only MTB company officially authorized to produce chainrings with the X-SYNC technology. So now, no matter what kind of mountain bike you have, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. SPECS - Official SRAM X-SYNC technology. Complies with SRAM warranty standards for compatibility with all SRAM X-SYNC drivetrain. - Chamfered mud-clearing recesses at the base of the teeth provide the best possible performance in muddy conditions. - CNC Machined from 7075T6 aluminum for the best durability. - Available for 104/94 BCD crank spider patterns and Direct Mount options. - 7075-T6 aluminum - Anodized Black with laser etch - CNC machined in Whistler, BC. Sequence rings are available in: - 30/32/34/36 tooth (104 BCD) - 28/30 tooth (94 BCD) - 28/30/32 tooth (Direct Mount RFC) - 28/30/32 tooth (Direct Mount GXP) - 28/30 tooth (Direct Mount BB30) - 28/30/32 tooth (Direct Mount Boost) Compatibility Notes: - 104 BCD is the most popular crank arm spacing design (refer to manufacturers specifications to check for compatibility). - Direct mount rings work with SRAM S1400, S2200, S2210, X9 XO and XX1 crank arms. - Direct Mount Sequence rings are available for with GXP and BB30 bottom brackets as well as Race Face Cinch cranks.
Crank Brothers Tread Contact Sleeves
$8.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Crank Brothers Shoe Shields
$10.00
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers 5050 Pin Kit
$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Crank Brothers Traction Pads for Candy 7/11
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Crank Brothers Traction Pads for Mallet E
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Crank Brothers Pedal Rebuild Kit
$15.99 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Crank Brothers Cobalt Grips
$22.49
Crank Brothers' Cobalt Grips are the go-to choice for XC rides long and short. These supportive, high-density foam grips offer a solid grip and superb bar feel. They utilize dual locking clamps to ensure the grips don't twist while you're riding.
Crank Brothers Iodine Grips
$22.49
Crank Brothers' Iodine Grips have what you need for all-mountain riding. Their Kraton rubber construction and tacky logo pattern offer a solid grip and superb bar feel. And, to prevent twisting, they utilize dual locking clamps.
Crank Brothers Zero Float Cleats
$24.29
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
Crank Brothers Pedal Refresh Kit
$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet and Quattro pedals. They're made from solid brass for crisp entry and exit and top-notch durability.
Page 1 of 10 Next page