Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "crank brothers"

Crank Brothers Candy 2
$94.99 - $99.99
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged scm 435 chromoly steel Body material: 6061-T6 aluminum Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 355g per pair Warranty: 5 years
Race Face SixC Crankarms
$459.99
- The carbon crank arms are completely hollow with all unnecessary material being removed from the centre core - no internal aluminum spine - Industry standard 30mm spindle with Cinch spline interface. The spindle is CNC machined from a newly commercialized aluminum 'super alloy' that is 20% stronger than 7050 alloy (the alloy commonly used in this application) - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - The interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames
Crank Brothers Highline Dropper Seatpost
$350.00
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years
SRAM Apex Crankset
$136.00
SRAM's Apex Crankset is designed for capable stiffness at an impressive weight. The cold-forged aluminum arms are tough, rigid and perfectly complement your favorite ride. SRAM's long-lasting Powerglide chainrings are hard anodized and designed for quick, positive shifting in all conditions. Plus, the Apex crankset comes with SRAM's smooth-spinning GXP bottom bracket.
Race Face Atlas Cinch Crank Arms
$209.99
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g
SRAM BB30 Bottom Bracket Assembly w/Ceramic Bearings
$227.00
Get more distance out of every pedal stroke with SRAM's phenomenal BB30 Bottom Bracket Assembly. It features ceramic bearings that drastically reduce drag on the crankset, meaning more of your power turns into forward momentum. Plus, it presses directly into your frame's BB30 bottom bracket shell for reduced weight and increased longevity.
SRAM Omnium Track Crankset (48T)
$257.00
Whether you ride in ovals or in traffic, SRAM's sleek Omnium Track Crankset provides the stiffness you need to lay down the power. SRAM's proven design is super efficient and the forged aluminum crankarms are impressively strong. Plus, the stout 5mm thick chainring will last for miles.
Crank Brothers Traction Pads for Candy 7/11
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Crank Brothers Stamp 11
$300.00
Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Odyssey Mid Bottom Bracket
$18.99 - $24.99
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.00 - $6.00
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Wheels Manufacturing Inc. Pressfit 41mm Angular Contact Fat Bike Bottom Bracket
$99.00
BB86 threaded BB for Fat Bike PF41. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Drive Side Bearing: Enduro Angular Contact - Non-Drive Side Bearing: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF41 - BB121, PF41 - BB132 - Bottom Bracket Shell Width (mm): 121mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: SRAM / Truvativ GXP - Crank Spindle Diameter: 22/24mm - Weight: 120g
SRAM RED 11-Speed Crankset
$439.00 - $476.00
Already a legend in its time, the SRAM RED crankset is now available with refreshed graphics to complement the SRAM RED eTap componentry. The SRAM RED crankset features a completely hollow construction all the way to the spider. Its hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. As always, for seamless, flawless performance and Yaw compatibility, pair this crank with X-GlideR chainrings. - SRAM Road 11-speed compatible - Compatible with SRAM RED eTap components - Exogram technology uses a large, hollow cross section all the way to the spider, minimizing weight while maximizing stiffness - SRAM's stiffest crank ever - Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance - Stiffer X-GlideR chainrings feature thicker construction and advanced shift timing pins and ramps, which are optimized for shifting with the Yaw front derailleur - Arm Material: Carbon - Chainring Material: Machined alloy - Weight: 557 grams (BB30 172.5mm 53x39 BB not included) - Compatibility: SRAM RED & SRAM Force Yaw Front Derailleur, SRAM RED 22 & PC1170 chains - Finish: Carbon - Bottom Bracket Compatibility: BB30, PressFit 30
SRAM X01 Carbon Eagle DUB Crankset
$485.00
The X01 Eagle DUB crankset is designed to be tough; ready for aggressive Trail and Enduro riding. The Carbon-tuned crankset paired with DUB technology simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
Race Face CINCH Bolt with Washer 18mm XC/AM
$9.99
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$6.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Crank Brothers 5050 Pin Kit
$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Campagnolo Potenza 11 Crankset
$300.00
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests. -Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings -Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup -Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly -Requires use of Power-Torque bottom bracket cups -Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain -Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
Campagnolo H11 Crankset
$720.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Crank Brothers Mallet DH
$169.00
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
Crank Brothers Stamp 2
$79.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm (Large); 100mm x 100mm (Small) - Weight: 470g per pair (Large); 415g per pair (Small) - Warranty: 5 years
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
SRAM NX 1x X-Sync Crankset
$125.00 - $156.00
The SRAM NX crankset provides high performance at the right price. Featuring the SRAM engineered X-SYNC chainring, the NX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. Personalize your gearing with five available chainrings. - 6000 series aluminum arms - BOOST 148 compatible - Fully compatible with all SRAM 1x drivetrains - Arm Material: Aluminum - Chainring Material: Aluminum - BCD: 94mm - Weight: 680–780 grams - Interface: 24mm *Bottom bracket sold separately
SRAM Red GXP BlackBox Bottom Bracket Cups w/ Ceramic Bearings
$210.00 - $227.00
SRAM's Red GXP BlackBox Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature ceramic bearings that drastically reduce drag on the crankset, meaning more of your power goes directly to the road. Plus, the ceramic bearings and stainless-steel races mean these cups are incredibly light and durable, too!
SRAM RED Quarq Power Meter Crankset
$1,079.00
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$49.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Wheels Manufacturing Inc. PF30 Fat Bike Angular Contact Bottom Bracket
$99.00
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 129g
Chris King ThreadFit 24 Conversion Kit #11
$28.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 68mm Threaded BB Shell - 24mm to 22mm Stepped Mountain Cranksets - Common Cranks: SRAM mountain, Bontrager mountain, TruVativ mountain, Zinn mountain - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Wolf Tooth Components 110 BCD Cyclocross and Road Chainrings
$79.95 - $89.95
Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Page 1 of 10 Next page