Indoor Cycling/Trainers

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more

This kit includes drive side and non-drive side adapters for bicycles with 12x142 or 12x148 thru axles. Note: This adapter is compatible with KICKR CORE and KICKR v4(2018) and newer models of KICKR. Note: Kit also includes Shimano style and SRAM XD/XDR style freehub lock nuts that need to be installed.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!

This durable, padded travel bag is made to protect and secure your Pro Mechanic HD, Pro Mechanic, or Sport Mechanic repair stand when it's not in use. It features a zip closure, carry handles, and a clear card window for your luggage tag. This travel bag can also accommodate older Feedback repair stands such as the Pro Elite and Classic. Our repair stand travel bags are the best protective accessory for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand, and keep it looking new with a protective travel bag. Features: - Sized to fit the Pro Mechanic HD repair stand. - Also compatible with Pro Elite, Sport Mechanic and Ultralight repair stands. - Maximize the portability of your Feedback Sports repair stand. - Protect your stand’s aluminum finish and your other equipment when traveling. - Travel bag is water-resistant, durable, and padded. - Enough space for a repair stand, Flop Stop, and Pro Truing Stand. - External window for business cards / ID card. - Padded Velcro™ strap for comfortable carrying and transport. - Full-length, dual-zipper design. - Rugged end-loops for vertical storage when not in use. - 1-Year Warranty.

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

Connect your PC to CycleOps VirtualTraining.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly

TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS WHAT'S INCLUDED: - Thru axle - Washers - Endcaps with bolts - The 148x12mm adapters also come with a shorter bolt action slider tube. TRAINER COMPATIBILITY The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. BIKE COMPATIBILITY Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes. 148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for: - 148 x 12mm - 142 x 12mm - 1.5 thread pitch

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano). - Compatible with 12 speed cassette.

The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.

Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.

The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position. Compatible with tires up to 56mm wide

Wahoo's latest accessory for the KICKR Smart Trainer lets you worry less about your connection and focus on your virtual ride at hand. No more wireless drop outs or signal interference—KICKR Direct Connect attaches your KICKR to your router for a constant streaming virtual ride or race. Compatible with many 3rd party apps including The Wahoo SUF Training App, TrainerRoad, Fulgaz, and many more. Note: KICKR Direct Connect is not compatible with previous KICKR editions, KICKR CORE, and KICK SNAP. Don't Get Dropped No more worrying about your wireless connection dropping during your virtual races and online group rides. KICKR Direct Connect provides a hard-wired solution from your KICKR Smart Trainer to your internet router. Safe and Secure To prevent damage to the Direct Connect Pod or your KICKR, Direct Connect has a Quick disconnect cable that is robust enough to stay attached during normal use but will easily break the connection if enough pressure is applied. Zero Configuration Direct Connect is built on Multicast DNS to provide a simple, plug-and-play solution to stay connected. App Compatibility KICKR Direct Connect is compatible with The Wahoo SUF Training App, Trainer Road, Rouvy, Fulgaz, bKool, RGT Cycling, and Veloreality, with more 3rd party partners coming in the future.

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

You’re already a proud owner of the Omnium Zero-Drive Bike Trainer, but today you’re looking for a sweat-inducing, intense workout. Designed to be lightweight and portable, the Omnium Trainer is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Omnium Over-Drive Sled be your next training accessory. Features: - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Patented, Internal Progressive Resistance via friction-less Eddy Current Technology - Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance) - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for use and fold for storage and travel - Maintenance-free resistance unit and roller bearings - Compatible with Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features* *Requires ANT+ or BT rear wheel speed sensor

Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers. The durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily adjusted wheelbase and a limited lifetime warranty.

Tuo is an interactive trainer with automatic resistance adjustment. Compatible with multiple e-training software platforms via wireless communication. Elastogel resistance roller increases tire life and decreases noise. Stylish construction of aluminum resistance unit, steel frame with beechwood legs. - Tuo can be managed via the My E-Training software (12-month free subscription) or other indoor cycling services (which usually require paid subscription), such as: Zwift, TrainerRoad, The Sufferfest, Bikevo, Kinomap and many more. - Compatible with 130mm QR all the way to 148x12mm thru-axle with included adaptors - Simulates up to a 10% slope - Accuracy to +/- 3% - Fully assembled

Love riding when you travel? Weekends spent at the races? Or just want to be able to train in a small living space? Meet the Omnium Zero-Drive Portable Trainer. The foldable, compact and adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any trainer available. Plus it’s unique roller design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides in its padded tote like it was never there. Add a Sweat Guard and Floor Mat and you’re armed with the complete training package. - Zero Resistance is ideal for high-speed spinning and track cycling workouts - Adaptable fork-mount and sliding sled design (16”-29” wheel; thru-axle and QR compatible) - Lightweight 13.3lb (6.03kg) design makes it the ideal, portable cycling training partner - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Included fork adapters: - 9mm Quick-Release - Thru Axle: 12×100mm, 15×100mm & 15×110mm - Available fork adapters: - Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike) - Adaptable to virtually any bike size and geometry - Optional Sled Extension (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for cycling training and fold for storage and travel - Maintenance-free resistance unit and roller bearings - Includes heavy-duty, water- and abrasion-resistant tote bag for easy transport and storage

You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory. - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience - Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for use and fold for storage and travel - Maintenance-free resistance unit and roller bearings - 3-Year Warranty