Filter By:
- Parts & Accessories (32)
- CO2 Inflators (51)
- Floor Pumps (22)
- Mini Pumps (33)
- Shock Pumps (5)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pumps/Inflation

$2.99
The Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube at the molecular level; and sandpaper for abrading the tube. The kit is packaged in a protective small plastic box.

$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

$3.50
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!

$3.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

$4.95
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.

$6.49
Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.

$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost
- Soft rubber block and Velcro loops hold pumps tightly

$7.99
Lightweight plugs for tubeless tire punctures.
When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

$7.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

$8.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

$9.99
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.

$9.99
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.

$10.00
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.

$10.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection.
- Hose barb fits into all SILCA hoses both old and new
- Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter)
- All metal construction, nickel-plated brass

$11.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

$11.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

$12.99
Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.

$14.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

$14.99
Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.

$14.99 - $19.99
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged.
- Compact, lightweight design fits in tight spaces
- Press-on for both Presta and Schrader valves
- Compatible with 3/8” threaded cartridges
- Rotate CO2 cartridge to regulate inflation
- Kit includes CNC-machined aluminum inflator head with a green finish for better visibility

$14.99
-High Volume Telescoping alloy barrels with high-pressure and high volume modes
-Autohead fits Presta or Schrader valves without converting
-Ergonomic T-handle for maximum pumping efficiency
-Ultra compact design fits into many seat packs or jersey pockets
-Includes mounting bracket
-Rebuildable

$14.99
Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs.
- Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use
- Threads directly onto Presta or Schrader valve without adapter
- Compatible with threaded cartridges
- Small size fits in saddle bag or jersey pocket
- Size: 48 x 40 x 25 mm
- Weight: 56 grams

$15.00
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader.
- Compact design for easy storage
- Alloy construction for durability and lightweight
- Press on for both Schrader and Presta valves
- Compatible with all 3/8" threaded compressed air cartridges

$15.99
CO2 inflator with 2 cartridge set
Details
- 2 Threaded 16g CO2 cartridge and Klic CO2 head/cartridge adapter (presta only)
- Inflator compatible with threaded 12g, 16g, 20g, and 25g cartridges.
Specs
- Warranty: 5 years
- Weight (Inflator only): 45g

$15.99
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power!
- Compact and nearly indestructible
- Easy to use and fully controllable
- Patented twist-to-inflate technology
- Press on to both Schrader and Presta valves
- Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges
Product includes:
(1) Microflate Nano inflator head
(1) threaded 20 gram CO2 cartridge
Page 1 of 5
Next page