Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Indoor Bike Trainer Accessories
Indoor Bike Trainer Accessories
These must-have accessories will help you get the most out of your winter workouts.
$440.00
You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory.
- Precision machined 4.25” aluminum rollers create a smooth and quiet ride
- Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience
- Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender)
- No tools required to assemble or store — simply unfold for use and fold for storage and travel
- Maintenance-free resistance unit and roller bearings
- 3-Year Warranty
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$99.99
The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position.
Compatible with tires up to 56mm wide
$99.99
Wahoo's latest accessory for the KICKR Smart Trainer lets you worry less about your connection and focus on your virtual ride at hand. No more wireless drop outs or signal interference—KICKR Direct Connect attaches your KICKR to your router for a constant streaming virtual ride or race. Compatible with many 3rd party apps including The Wahoo SUF Training App, TrainerRoad, Fulgaz, and many more.
Note: KICKR Direct Connect is not compatible with previous KICKR editions, KICKR CORE, and KICK SNAP.
Don't Get Dropped
No more worrying about your wireless connection dropping during your virtual races and online group rides. KICKR Direct Connect provides a hard-wired solution from your KICKR Smart Trainer to your internet router.
Safe and Secure
To prevent damage to the Direct Connect Pod or your KICKR, Direct Connect has a Quick disconnect cable that is robust enough to stay attached during normal use but will easily break the connection if enough pressure is applied.
Zero Configuration
Direct Connect is built on Multicast DNS to provide a simple, plug-and-play solution to stay connected.
App Compatibility
KICKR Direct Connect is compatible with The Wahoo SUF Training App, Trainer Road, Rouvy, Fulgaz, bKool, RGT Cycling, and Veloreality, with more 3rd party partners coming in the future.
$89.99
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer.
- Reads data based on the type of trainer used.
- Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices.
- When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
$79.99
- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano).
- Compatible with 12 speed cassette.
$79.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides.
- Impervious to sweat and spilled water bottles.
- Gripping texture keeps the KICKR in place, so you can focus on your ride.
- Material helps to reduce noise and make the KICKR even quieter.
- Beveled edge keeps the mat in line with the floor.
$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage
$59.99
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house.
Dimensions: 1.8m x .9m
$59.99
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS
WHAT'S INCLUDED:
- Thru axle
- Washers
- Endcaps with bolts
- The 148x12mm adapters also come with a shorter bolt action slider tube.
TRAINER COMPATIBILITY
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
BIKE COMPATIBILITY
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes.
148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for:
- 148 x 12mm
- 142 x 12mm
- 1.5 thread pitch
$59.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices.
- No tangled wires on your bike to connect the sensor to your device.
- Provides accurate speed data during your ride
- Provides accurate cadence data during your ride
- BlueSC comes with a rubber band mount and zip tie mount.
- The Blue SC sensor will fit with most bikes and frame sizes
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$54.00
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- This axle is for Surly bikes with the MDS/Gnot Boost system.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability.
- No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$44.99
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
$39.99
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly
- Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6%
- Anti-slip rubber feet eliminate handlebar vibrations
- Internal design that guarantees maximum wheel stability
- Suitable for both road and MTB
- You can attach to the trainer frame when not in use for easy transport and storage
$39.99
For a stable, worry-free ride with any rear wheel-mounted trainer.
Product Features
- For a stable, worry-free ride with any rear wheel-mounted trainer.
- Unique 3-level design lets you select the level of difficulty.
- Stack two blocks to simulate climbing workouts.
Three different positions to raise your front wheel and simulate hill climbs
- 2.1 inches (5.3 cm)
- 2.7 inches (6.8 cm)
- 3.1 inches (7.9 cm)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$38.24
$44.99
15% Off
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$34.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
$34.99
This kit includes drive side and non-drive side adapters for bicycles with 12x142 or 12x148 thru axles. Note: This adapter is compatible with KICKR CORE and KICKR v4(2018) and newer models of KICKR.
Note: Kit also includes Shimano style and SRAM XD/XDR style freehub lock nuts that need to be installed.
$29.99
The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training.
- Reduces vibrations on the handlebars for more comfortable training
- Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel
- Suitable for road and MTB
$29.99
- Includes clutch knob and L-bolt
- Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt
- Magnus Clutch Knob should only be used with Magnus Smart Trainer
- Watch our video to learn more
$24.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$19.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$19.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
Page 1 of 2
Next page