12- to 24-Inch

The Bunny Hop is a solid BMX contender with a uniform configuration of sipes and treads engineered for consistent traction when maneuvering between asphalt and pavement. Go ahead, shake that tail! - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

With the increased strategical placement of Grip-Pods matched to multi-facet Nano Knobs on shoulder and sides, capped off with friction-enhancing chemical etching over the central tread, FASTR-X strikes the rarefied balance of speed and control like none before. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 451mm

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 406mm

The Fireball tire is wide, grippy and reinforced with a puncture-resistant nylon belt. - 60 TPI construction, wire bead - High-rated pressure 100 PSI - Puncture-resistant nylon layer

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

The Mike Aitken signature Aitken tire features a tread pattern for street and dirt and is ideal for use at high speeds. - Dual ply casing

The Ride Tour is at home on any surface: a real all-rounder continuous center tread provides good rolling characteristics and ample traction when cornering. Reliable puncture protection thanks to Extra Puncture Belt Durable casing and long-lasting tread impress on all rides.

- Premium mobility for design enthusiasts. - Urban profile packed with the latest technology. - The perfect symbiosis between light-rolling and puncture protection reflected in this specialized tire designed for the City Jungle. - Faster? Not a problem with approval for E-Bikes up to 50km/h! PureGrip Compound Based on activated silica compounds, this technology was originally intended as a performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self-explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. While providing great grip, it is also long-lasting and highly durable—both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). SafetyPro The new SafetyPro Breaker designed from nylon textile. Cross-woven textile fiber netting that is simultaneously robust and flexible. Maximum puncture protection with minimal added weight. The risk of punctures resulting from glass or sharp stones is substantially reduced. E50—Suitable for E-Bikes For our E-Bike tires, we relied on over 100 years of experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high-quality structure, puncture protection is high and the rolling resistance is low, offering protection from premature wear brought about by the additional driving force.

The Ride Tour is at home on any surface: a real all-rounder Continuous center tread provides good rolling characteristics and ample traction when cornering. Reliable puncture protection thanks to Extra Puncture Belt Durable casing and long-lasting tread impress on all rides.

A kid-sized MTB tire with all of the technology and performance of the larger sizes. Kid-friendly fit, grown-up performance The XR1 Kids' is a durable, kid-friendly tire with the same reliable traction and performance as the grown-up versions. It rolls fast, features a versatile tread for a variety of trail conditions, and keeps weight down so little rippers can quickly gain speed and keep momentum through corners and up hills. Product details - Excels in firm and fast conditions - Offers fast-rolling and predictable cornering with consistent traction Specifications - Size: 12" x 2.25" - Diameter: 12" - Width: 2.25" - TPI: 27 TPI - Durometer: 60a - Bead: Wire - Type: Clincher - Max pressure: 50psi - ETRTO: 57-203 - Weight: 615g

- Freestyle BMX tire

- Park/street tire, with directionally grooved tacky tread - Wire bead - Size: 18 x 2.0

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths. - Excels on sidewalks and streets - Easy-rolling tread keeps kids riding smoothly - 27 TPI - Wire bead - Clincher - Max pressure: 50psi - ETRTO: 47-406 - Weight: 505g

The Jake Seeley signature Street Sweeper tire features a directional, dual compound construction. - Center tread features softer durometer - Side tread features a harder durometer to withstand grinds

The Donnastreet tire features a smooth center for low rolling resistance and an extra grippy, super-squeaky compound. - Tear-resistant silkworm casing

Salt Tracer Tire is made with a quality rubber compound and features a modern directional-tread design. - Knurled for improved traction

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

IRC produces a 125psi high pressure casing and wraps it with a factory-siped slick. Additional surface area is applied to the crown through the innovative use of reinforcement gussets at the edges.

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes. - Kenda K-52 Street BMX tire provides good traction in all paved conditions, gum side wall

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

Drop. The. Hammer. - Grooved slick tread design - Lightweight casing While originally designed as a BMX race tire, the DTH has found success beyond the track, including street riding, pump track, skate park, and slopestyle. The grooved slick maximizes rolling speed by minimizing drag.

Drop. The. Hammer. - Grooved slick tread design - Lightweight casing While originally designed as a BMX race tire, the DTH has found success beyond the track, including street riding, pump track, skate park, and slopestyle. The grooved slick maximizes rolling speed by minimizing drag.

Front and rear folding bead BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. The S-Spec version utilizes Tioga's thinnest sidewall for maximum suppleness and weight savings. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - ISO diameter: 406mm

The S-5 Black Steel Tire in K62 Tread is a great tire for any road bike. - K62 tread pattern - Made from quality Kenda rubber - ETRTO: 37-547 - Wire bead

Tom Dugan's signature Dugan tire features a fast center tread for park, street and dirt. - Dual ply casing

A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire's fast rolling center tread allows it to be used on all terrains. - Single-Ply sidewall

Primo tires designed for wheelchairs. - Gray tires for wheelchair - ISO diameter = 540mm - 75psi

The Ride Tour is at home on any surface: a real all-rounder continuous center tread provides good rolling characteristics and ample traction when cornering. Reliable puncture protection thanks to Extra Puncture Belt Durable casing and long-lasting tread impress on all rides.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths. - Excels on sidewalks and streets - Easy-rolling tread keeps kids riding smoothly - 27 TPI - Wire bead - Clincher - Max pressure: 50psi - ETRTO: 44-305 - Weight: 360g

For the next generation of riders. Evenly spaced knobs make for predictable riding characteristics and give beginners confidence on their trail adventures. The large volume casing provides extra damping and comfort.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

The CST Decade was designed for flatland BMX riding. - Smooth tread profile with no knobs to interfere with your feet while performing tricks

Rubber has always been a serious topic of discussion at WeThePeople. Not only is it the connecting point between your bike and what you’re riding, it also makes a huge difference as to how your bike feels. After the success of the Grippin' and Feelin' tires, WTP wanted a fresh new design based on the needs of the modern street rider. After a long process of testing compounds and refining the tread design, they came up with something quite special. The Stickin’ tire is the successful end result of over a year of hard work. It uses a specially designed shape and specific rubber compound that allows it to stick to nearly anything, yet enable you to grind endlessly without getting your tire stuck on the side of the rail or ledge. This 'street slick' beast was designed to grind and slide like nothing else.

Broc Raiford signature tire. Odyssey worked closely with Broc to dial in a tread that meets his riding needs while remaining simple and stylish. Odyssey's R-Grip rubber compound ensures superior grip and wear resistance. - Large Directional tread pattern - Odyssey R-Grip rubber compound - Superior grip & wear resistance - Micro knurling throughout - NOTE: Yes, it squeaks

The Mirage tire is built on the premise of a super-lightweight tire that was strong enough for the toughest street riders. The Mirage uses a high-performance 120tpi casing and a specially designed dual-compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control while cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead "Silkshield" protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. - High-performance lightweight street tire - Dual-compound construction - Full-length "Silkshield" layer under tread and sidewalls for added protection - Specially designed tire tread with a smooth center tread for low rolling resistance and aggressive sides for traction and grip - Special outer line for grind protection - Made by Maxxis tires

Designed by former World Champion, Olympic silver medalist and G.O.A.T contender Sam Willoughby, the Siren Pro offers BMX racers unparalleled performance on any track. Lightweight and fast-rolling, the 120 TPI, tubeless-ready tire rails turns, smooths out technical straightaways, and provides insane grip on the gate and out of corners. - Supple 120 TPI shaped casing - Center slick design for gaining maximum speed - Super-narrow gaps in the center tread grip the start gate without flexing - Wider gaps on the shoulder provide max grip when cornering

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

Mike Aitken's signature tire now available in Odyssey's lightweight and foldable K-Lyte option. This is the go-to tire for riders wanting to emulate Mike’s legacy as an all-around shredder. Low profile treads makes this a fast, versatile tire that can be used on any terrain. Whether you’re riding street, dirt, or park, this tire can do it all - just like Mike.

Your kids will hang with the big dogs on this cross country tire. The XR1 Comp Kids' Mountain Tire has a tread identical to that of its fully-grown adult version, perfect for multi-purpose riding on trails or pavement. - Excels in hardpack and loamy conditions - Ramp center knobs for fast rolling - Fast-rolling and predictable cornering - 60 TPI - Maximum pressure: 50psi - ETRTO: 56-622 - Weight: 890g - Wire bead

The Comp III in K50 Tread is a great tire for any BMX or kid's bike. - K50 tread pattern - Made from quality Kenda rubber

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

WTP's brand new all-terrain rubber is great for just about any kind of riding with enough tread on the side to help you "bite" into concrete or dirt, and a smooth center line to keep you rolling fast over just about anything. - All-round tread design - Durable, sticky compound - Fast but grippy all-round tire with traction cuts and smooth center line for low rolling resistance

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

- Kenda model K40 - Intended for street use

Proven on the mountain bike World Cup circuit and now taking the same grip and versatility to gravel and cross. This Booster Pro features the same aggressive tread pattern and performance rubber compound as it's larger MTB brother letting you push the limits off the trails. Optimized for tubeless use, resulting in one of the fastest and lightest aggressive condition gravel/cross tires on the market. - New tread design: modern and aggressive look, optimized for fast rolling and excellent cornering traction. - Always prepared: The Booster is a great choice for all seasons. It's fast on hardpack, but also holds its own when it gets wet and slippery. - Tubeless ready

The Super Circuit tire has been designed to meet the demands of pro-level BMX racing and park/transition riding. Some of Odyssey’s most iconic tires have inspired the Super Circuit's all-new tread design, with a focus placed on its shallow, grippy tread block depth and K-Lyte Plus casing layup to save weight. The Super Circuit tire features a fast and smooth center tread, knurling on the side blocks, and it is offered in a competition-ready foldable bead option only. - Designed for pro-level racing and park/transition - Lightweight K-Lyte with kevlar bead - Shallow, grippy tread block depth for to save more weight - Directional tread pattern with smooth center tread - Micro-knurled side blocks

- Large volume tire for comfort

A kid-sized MTB tire with all of the technology and performance of the larger sizes. Kid-friendly fit, grown-up performance The XR1 Kids' is a durable, kid-friendly tire with the same reliable traction and performance as the grown-up versions. It rolls fast, features a versatile tread for a variety of trail conditions, and keeps weight down so little rippers can quickly gain speed and keep momentum through corners and up hills. Product details - Excels in firm and fast conditions - Offers fast-rolling and predictable cornering with consistent traction Specifications - Size: 24" x 2.25" - Diameter: 24" - Width: 2.25" - TPI: 27 TPI - Durometer: 60a - Bead: Wire - Type: Clincher - Max pressure: 50psi - ETRTO: 57-507 - Weight: 325g