Your Search: "fx"

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)

The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

High performance suspension fluid formulated to provide fade-free performance. Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount

High performance suspension fluid formulated to provide fade-free performance. Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

A Technical Mountain Bike Short That Works On And Off The Bike The Ranger MTB Shorts pack mountain-bike-specific technology into a casually styled short that performs both on and off the bike. The stretch Ripstop fabric ensures maximum performance and superior durability. The waist adjusters are easy to adjust and extremely comfortable. The inner waistband features TruDri technology to move moisture away from your skin and keeps you cooler and drier. Features - Removable liner with dual-density chamois for improved saddle comfort - Stretch ripstop fabric maximizes performance on every ride - Goggle-strap-inspired low-profile waist-adjustment system ensures a perfect fit - TruDri-lined waistband moves sweat and moisture away from the body keeping you comfortable and dry - Secured zip pocket to stash everything you need for a ride - Durable Water Repellent finish sheds moisture, dirt, and debris - Sublimated camo print, Fox Head screen print - Inseam: 12" Construction - Shell: 57% polyamide nylon / 38% polyester / 5% elastane - Lining: 83% polyester / 17% elastane

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

The Defend short combines durability and 4-way stretch to keep you agile on the climb and covered on the descent. Ride with the Defend mountain bike short and push your limits on the toughest trails. - Ratchet closure provides a secure fit & quick on-the-fly adjustments - Secure zip hand pockets - TruMotion all-way stretch fabric for increased mobility - Body-mapping laser perforated areas on front & back keep you cool - Durable Water Resistant finish sheds moisture, dirt, & debris - Inseam: 14.5-inches (size large) - 94% polyester / 6% elastane

Lightweight, Minimal Mountain Bike Gloves With Exceptional Fit and Bar Feel Feel the bars like never before. The Flexair Gloves are a minimalist glove with an exceptional fit and lightweight feel. The stretch mesh finger gussets (the fabric between your fingers) increases flexibility as well as helps channel air through the glove for superior comfort. The Flexair glove also features a conductive thread on the thumb and index finger so you can use your phone without removing your gloves. - Minimalistic design for optimal comfort - TruFeel internal texture for heightened feel and control of levers - Stretch mesh finger gussets increase airflow and dexterity - Single-layer palm touchscreen compatible - Slip-on glove style MATERIALS - 95% nylon, 5% spandex

Our Best-Selling Mountain Bike Glove With Touch Screen Compatibility The Ranger Gloves are known for offering performance and quality that is typically only found in much more expensive gloves. A yearly best-seller, this versatile mountain bike glove works well in almost any discipline. The Ranger Glove continues to set the standard for performance, fit, and value in an affordable and great-looking MTB glove. - Compression-molded cuff for a secure fit - Absorbent micro-suede thumb - TruGel strategically placed gel palm protection - Touchscreen compatibility - Screen print artwork - Hook-and-loop wrist closure style Materials - 68% polyamide nylon, 14% polyurethane, 10% polyester, 5% elastane, 3% polyvinyl chloride (PCV)

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package

Dirtpaw Gloves - Youth

Minimal restrictions, maximized benefits. - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion resistant elbow panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra

Our Enduro Elbow Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your elbows safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O elbow inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

Minimal restrictions, maximized benefits - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion-resistant knee panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra

Super-light Stretch MTB Shorts Designed For All-Day Comfort And Unrestricted Mobility The Flexair Lite Short was designed to provide superior pedal efficiency for maximum comfort and performance on the bike. The superlight all-way stretch TruMotion material has been treated with a durable water-repellant coating for added weather resistance in addition to the trail-tuned performance. Our proven race ratchet closure system allows quick and easy adjustments for the perfect fit and a zip pocket keeps your essential items secure. Last but not least, the removable liner features our proven dual-density chamois for improved comfort on those long days in the saddle. Features - Super-light stretch fabric for all-day comfort and unrestricted mobility - Removable liner with dual-density chamois for improved saddle comfort - Secure zip pocket - TruDri fabrics move sweat away from the body to keep you dry - TruMotion all-way stretch fabric offers a full range of motion increasing mobility - Proven Race Ratchet closure provides a secure fit and quick on-the-fly adjustments - Body-mapped laser-perforations on front and back panels increase airflow keeping you cool - Durable Water Repellent finish sheds moisture, dirt, and debris - Dyed fabric w/ screenprints - 13" Inseam Construction - Shell: 87% polyester / 13% elastane - Lining: 90% polyester / 10% elastane

Packable, lightweight jacket designed for versatility in changing conditions.

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. - LOWER LEG BYPASS CHANNELS As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. - LOWER LEG ARCH Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. - GRIP2 Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. -FLOAT EVOL Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. - Performance-Elite series with black anodized stanchions - Step Cast (SC) legs with narrow stance and stepped design to saves weight, decrease frontal area, and provide clearance for the spokes and brake rotor - FIT4 damper with 3-position damper control - 160mm to 203mm rotor compatible post mount - Lightweight Kabolt thru-axle - Tapered threadless steerer

Ultralight, Movement-Friendly MTB Elbow Guards The Enduro D3O Elbow Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE-certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. Features - EN1621-1 Level 1 Elbow including high and low-temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon

Maximum coverage open-face mountain bike helmet. The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® fit system for class-leading fit and security, increased ventilation, plus an ionic+® anti-microbial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet. Key Features and Specifications: - BOA® fit system for class-leading fit and security - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Big Bore front vents include eyewear storage recess - Increased ventilation and decreased surface contact area improve cooling - Ionic+® anti-microbial liner and cheek pads to optimize fit - Fidlock magnetic closure Meets the NTA-8776 E-bike helmet certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 30% EPS, 11% EVA, 10% polycarbonate, 13% nylon, 11% Pom, 14% Tpee

Technical pants that works on and off the bike. Offering a performance-focused fit influenced by our top-tier mountain bike pants, Ranger Pants add an ultra-light build and strategically placed pockets to carry all of your essential items on the longest and toughest MTB rides. The slim silhouette and tapered leg of these pants mean you’re less likely to get caught up on things as you fly by. The stretch fabric is lightweight and durable, and won’t weigh you down as you pedal your way along the trail. Built to perform on the bike, yet bring it down to a state of relaxation when you’re off the bike, Ranger Pants are ready to roll. Key Features and Specifications: - Built to perform on the bike and relax off the bike - A slim silhouette and tapered lower leg reduces snag and drag - Technical stretch fabric is lightweight, durable, and pedal-friendly - Adjustable waist cinch with snap closure for a custom fit - Two zippered hand pockets to stash everything you need for a ride - Zipperless design enhances comfort while riding Mountain bike pants and shorts feature a zipperless design aimed at enhancing comfort while riding. This design is particularly beneficial when the rider is in a bent-at-the-waist riding position. Materials: 97% polyamide nylon, 3% elastane Care: - Machine wash gentle cold - Wash dark colors separately - Use a gentle detergent - Line dry in the shade - Do not use fabric softener - Do not bleach - Do not iron - Do not dry clean

The Ultimate Mountain Bike Jersey For Speed And Performance The Flexair Jersey is designed to function seamlessly with the human body. It's cut from lightweight and flexible materials that anticipate your every move. The championship-winning jersey has been refined to maximize breathability and increase mobility. But, some things never change—TruDri fabric continues to be the foundation of the jersey, rapidly wicking moisture to keep you cool and dry. Active-fit sleeves with articulated darting provide a contoured fit while in a dirt bike riding position. Laser-perforated venting throughout the arms increases breathability. - Abrasion-resistant sleeve and shoulder panels guard against trail overgrowth - Slit hem detail offers maximum mobility - Flatlock seams provide improved comfort - Signature halftone dot print at lower garment creates the look and feel of going fast - Mountain bike-specific tailoring - Drop tail back panel for bike-specific coverage - Length (HPS): 31", size large MATERIALS - Body: 95% polyester, 5% Lycra - Sleeves: 89% polyester, 11% Spandex.

Protect your rides

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

The Speedframe Pro Blocked Helmet has earned Virginia Tech’s best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face mountain bike helmet offers a market-leading feature set. Top of that list is MIPS, which is designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb EPS bumps up that impact protection even further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, and the buckle is a cinch to operate, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and once it gets a little stinky, is easily removed and washed. Goggles pair well with the Speedframe Pro Blocked Helmet too, thanks to the 3-position adjustable visor. If you’re looking for a performance-minded trail helmet, congratulations—you just found your new lid. - MIPS added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360° Fit System allows you to dial in your perfect fit every ride - Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

The Ranger Foxhead jersey keeps you comfortable and relaxed on the trail by combining the comfort of your favorite tee with mountain bike specific fabric and construction technology. It has a loose fit the drapes your body comfortably and a style that looks great on and off the bike. - TruDri fabrics move sweat away from the body to keep you dry - Seamless vent construction for added breathability - Seamless mesh panel for ventilation - Engineered knit jacquard - Length (HPS): 31-inches (size large) - 100% polyester

Our Best-Selling Mountain Bike Gloves With Gel Padding and Knuckle-Length Digits Like all products in the Ranger collection, the Ranger Gel Half Finger Gloves offer performance and quality that is typically only found in much more expensive gloves. However, with the gel version, you get added protection from strategically placed gel padding on the palm. It is a highly versatile mountain bike glove that works well in almost any discipline. This half finger option provides increased breathability. - Compression-molded cuff for a secure fit - Absorbent micro-suede thumb - TruGel strategically placed gel palm protection - Conductive threads at index finger and thumb for touchscreen compatibility - Screen print artwork - Hook-and-loop wrist closure style MATERIALS - 69% nylon, 17% polyurethane, 10% neoprene, 2% polyester, 2% elastane

The ultimate in speed and performance.

Insulated Neck Gaiter There's nothing quite like a gaiter to keep you warm on a descent. The Polartec Neck Gaiter regulates heat to keep your neck warm on those chilly rides, and once you hit the downhill just pull it up over your chin or nose and it'll stay there, extending those warming benefits where you need it most. Features - Polartec fabric actively regulates heat to keep you warm and dry - Secure fit during aggressive rides - Breathable for comfort during the ride - 85% polyester / 15% elastane

Essential performance for tomorrow's champions The riders of tomorrow need the gear that'll keep them feeling pro while staying protected, today. The Youth Dirtpaw Gloves are high-performance dirt bike glove without the high price tag. Dirtpaw Gloves have armored knuckles, padded palm, and silicone print fingertips for great lever grip. The hook and loop closure provides a secure fit, and built-in stretch gives young riders maximum dexterity for the ride. - Compression molded neoprene cuff for a secure fit - Padded, single layer conductive Clarino palm is touch screen compatible - Durable nylon top of hand material with direct inject, TPR knuckle coverage - Stretch mesh finger gussets increase airflow and dexterity - Silicone print at fingertips for lever grip - Hook and loop wrist closure style MATERIALS - 50% polyamide nylon, 16% polyurethane, 12% neoprene, 8% runner, 7% polyester, 4% elastane, 3% silicone

When you're battling the elements, you want gear that'll help you defeat them, handily. The Ranger Fire Jacket offers the ultimate in cold-weather protection, and features a three-layer shell with a tough polyester exterior, an internal membrane for additional protection, and a brushed fleece interior to ratchet up the warmth. With its drop trail to ward off trail debris and ample pockets to stash your stuff, this versatile jacket is the jacket of choice for riders who look at dropping temps, say "no days off", and get after it. Best of all, it's just as at home off the bike as on.

The ultimate in speed and performance

Performance-focused open-face trail helmet - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3 position adjustable visor - 360°Fit System allows you to dial in your perfect fit every ride

The Ultimate Mountain Bike Jersey for Speed and Performance The Flexair Long Sleeve Jersey is worn by our top athletes in the UCI World Cup Downhill circuit. With its technical features and next-level materials, it will keep you far out in front of the pack. No longer are you limited to bulky and baggy gear that sacrifices fit for functionality. The Flexair mountain bike jersey combines lightweight, airy materials with an all-way stretch construction and targeted ventilation. The result is a jersey that is so comfortable, you might forget you're wearing it. - Abrasion-resistant sleeve and shoulder panels guard against trail overgrowth - Slit hem detail offers maximum mobility - Flatlock seams provide improved comfort - Signature halftone dot print at lower garment creates the look and feel of going fast - Mountain bike-specific tailoring - Drop tail back panel for bike-specific coverage - Length (HPS): 31", size large MATERIALS - Body: 95% polyester, 5% Lycra - Sleeves: 89% polyester, 11% spandex

All the performance of technical fabric but with the comfort of your favorite tee, the Ranger Font Long Sleeve Jersey lives to keep you cool when you hit the trail. This versatile long sleeve jersey has a drop tail back panel the coverage you want and is constructed from TruDri fabric to keep you cool by wicking sweat away from your body as you shred. It delivers best value performance and with its effortless simplicity, looks great both on and off the bike. - TruDri fabric moves sweat away from the body to keep you dry and comfortable - Full garment utilizes recycled fabrics - Mountain bike specific tailoring - Drop tail back panel for bike-specific coverage - 100% polyester

The Women's Ranger jersey keeps you comfortable and relaxed on the trail by combining the comfort of your favorite tee with mountain bike specific fabric and construction technology. It has a loose fit that drapes your body comfortably and a style that looks great on and off the bike. - TruDri fabrics move sweat away from the body to keep you dry - Seamless vent construction for added breathability - Seamless mesh panel for ventilation - Engineered knit jacquard - Length (HPS): 27-inches - 100% polyester

The Launch Elite Elbow Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Lightweight, and constructed in a minimal sleeve style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Elbow Guards.

- TruDri fabrics move sweat away from the body to keep you dry and comfortable - Carvico sleeve and shoulder panels increase abrasion resistance - Slit hem detail offers maximum mobility - Bonded hem, neck and sleeve openings reduce chafing - Body mapped laser cut perforations increase cooling

Ride everywhere. The Women's Ranger Drirelease jersey has a soft feel and relaxed fit which conceals advanced moisture wicking technology. It keeps you comfortable on the trail while providing the comfort of your favorite tee. Featuring Drirelease, the jersey wicks sweat, dries quickly and prevents odor so you can take a ride on your lunch break and get away with it. - TruDri fabrics move sweat away from the body to keep you dry - Drirelease yarns wick moisture, dries quickly, and neutralizes odors - Length (HPS): 27-inches - Body: Drirelease 85% polyester / 15% cotton - Panels: Drirelease 84% polyester / 14% cotton

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)